Filter
Top Products
242 Chapter 1
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:IS2000:TRACe:ABSolute:POWer[:BASic][:VALue]?
IS-2000 only. This query returns an array of 128 values representing
the true (absolute) power of the Walsh channel on which the Marker is
currently positioned.
NOTE
The value returned represents the absolute power of the Walsh channel
not the supplemental channel. The power of the supplemental channel
must be read directly from the Marker Lvl value on the CODE
DOMAIN screen, or with the
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ALL?
query.
Syntax
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS][:VAL]?
Screen/field equivalent
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS][:VAL]? returns values
that match the values displayed for Power, Fast Power, and Power &
Noise measurements when CD pwr unit is set to Abs from the
Reference image on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
:CDANalyzer:IS2000:TRACe:ABSolute:POWer[:BASic]:ACTive?
IS-2000 only. This query returns the active channel information for the
Code Domain trace when making a Power, Fast Power, or Fast Power
Synchronize measurement. The returned entity consists of an integer
representing the number of active channels followed by a four-value
record for each channel. The four values for each record are:
• Channel number
• Spread factor for this channel
• Power for this channel
• A fourth (ignore it) value
Syntax
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ACT?
Screen/field equivalent
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ACT? has no equivalent
field on the CODE DOMAIN screen. The information can only be
returned when the CDMA standard is set to “IS-2000”, the
measurement selected is Power, Fast Power or FstPwr Sync, and CD
pwr unit is set to Abs on the Reference image of the CODE DOMAIN
screen.