Filter
Top Products
33
Safety Considerations for this
Instrument
SAFETY EARTH GROUND
A uninterruptible safety earth ground must be provided from the main
power source to the product input wiring terminals, power cord, or
supplied power cord set.
CHASSIS GROUND TERMINAL
To prevent a potential shock hazard, always connect the rear-panel
chassis ground terminal to earth ground when operating this
instrument from a dc power source.
WARNING
This product is a Safety Class I instrument (provided with a
protective earthing ground incorporated in the power cord).
The mains plug shall only be inserted in a socket outlet
provided with a protective earth contact. Any interruption of
the protective conductor inside or outside of the product is
likely to make the product dangerous. Intentional interruption
is prohibited.
This product is not intended for use in wet or damp
environments. Do not expose this product to excessive
moisture. Operate this product only within the temperature
and humidity ranges specified in the user’s manual.
This instrument is equipped with internal ground fault circuit
interrupter class A.
• This device does not protect against electrical shock due to
contact with both circuit conductors or a fault in supply
wiring to product.
• Do not use extension cord to connect this product to power
receptacle. Attention-ne pas utiliser de rallonge pour
raccorder le detecteur-disjoncteur a la prise de courant.
• Replace cordset only with Agilent Technologies 8120 series.
Attention - Remplacer uniquement par un cordon amovible
numero 8120.
• Do not use in wet location. Ne pas utiliser dans un
emplacement mouille.
!
!
!