Filter
Top Products
82 Chapter 1
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMPS|TACS:SAT:FM <real number>
:AMPS|TACS:SAT:FM?
These commands set/query the SAT level when the AFG2:DEST ‘FM’
and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level’s
units are kHz.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:AMPS:SAT:FM
AFG2:AMPS:SAT:FM?
Screen/field equivalent
AFG2:AMPS:SAT:FM controls the SAT Level field when AFGen2 To
field is set to FM on the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACS and the Channel field is set to Voice.
:AMPS|TACS:SAT:LEVel <real number>
:AMPS|TACS:SAT:LEVel?
These commands set/query the SAT level when the AFG2:DEST ‘Audio
Out’ and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level
units are mV.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:AMPS:SAT:LEV
AFG2:AMPS:SAT:LEV?
Screen/field equivalent
AFG2:AMPS:SAT:LEV controls the SAT Level field when AFGen2 To
field is set to Audio Out on the SIGNALING ENCODER screen when
the Mode field is set to AMPS-TACS and the Channel field is set to Voice.