Filter
Top Products
226 Chapter 1
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:ADC <meas cmnd>
:CDANalyzer:ADC?
IS-95 Only mode. These commands set/query the ADC measurement in
the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CDAN:ADC <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CDAN:ADC?
Example
MEAS:CDAN:ADC?
Screen/field equivalent
MEAS:CDAN:ADC? reads the ADCfs measurement field on the Gain
menu of the CODE DOM screen when the CDMA standard is set to
“IS-95 Only”.
:CDANalyzer:CARRier:FEEDthrough <meas cmnd>
:CDANalyzer:CARRier:FEEDthrough?
IS-95 Only mode. These commands set/query the carrier feedthrough
measurement on the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CDAN:CARR:FEED <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CDAN:CARR:FEED?
Example
MEAS:CDAN:CARR:FEED?
Screen/field equivalent
MEAS:CDAN:CARR:FEED? reads the Car FT measurement field on
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”.