Filter
Top Products
Tools and Calendar 164
Reconnect a Headset or Car Kit
Normally, you can easily reconnect your headset by switching on Bluetooth on your phone, and then
turning on the headset. However, you might have to connect manually if your headset has been
used with another Bluetooth device.
Important: Make sure that the headset is discoverable. Refer to the headset manual for details.
1. With two fingers, swipe down from the status bar to open Quick settings.
2. Touch the Bluetooth tile to turn Bluetooth on.
3. Touch below the Bluetooth tile to open the Bluetooth screen.
4. Touch the headset’s name in the Paired Devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit documentation to
find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect From a
Bluetooth Device, and then follow the steps in Connect a Bluetooth Headset or Car Kit.
Disconnect From a Bluetooth Device
If you do not need to use Bluetooth at any given point, you can disconnect and unpair your phone
from a Bluetooth device.
1. With two fingers, swipe down from the status bar to open Quick settings.
2. Touch the Bluetooth tile to turn Bluetooth on.
3. Touch below the Bluetooth tile to open the Bluetooth screen.
4.
In the Paired Devices section, touch next to the device to unpair.
5. Touch Unpair.
Note: Touch the name of the device to reconnect it.
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled
device such as a phone or notebook computer. The first time you transfer information between your
phone and another phone, you need to enter or confirm a security passcode. After that, your phone
and the other phone are paired, and you will not need to exchange passcodes to transfer
information in the future.