Filter
Top Products
Chapter 17 Appendices
Probe Switches XVII-5
17-1-4 PRB-DMY101C77-M
Dummy target boards differ depending upon the models. This board can be used for only
101C77 64PIN.
When unconnected to the target, use this board with the PRB-MBB101C77-M.
Improper matching may cause any damage to the ICE.
Figure1: PRB-DMY101C77-M Layout
< How to connect >
Connector board: PX-CN101-M
MBB board: PRB-MBB101C77-M
Dummy target: PRB-DMY101C77-M
Make sure that the points
marked are put together.
[Caution1]
[Caution1]
Connect CNE of PRB-MBB101C77-M to CNE of PRB-DMY101C77-M, and CNF o
f
PRB-MBB101C77-M to CNF of PRB-DMY101C77-M.
When connecting the boards, make sure that they are connected without tilt.
If
y
ou put pressure on one side the board, that ma
y
cause an
y
dama
g
e to the pins.