Filter
Top Products
4-64
Screens
Measurement Sync
Measurement Sync
This screen defines settings that determine how synchronization will occur for any
of the following measurements:
• Pwr Ramp and Pulse
• Output RF Spectrum
• Pulse On/Off Ratio
1. ARFCN If Auto is chosen in the Hopped TCH ARFCN Cntl field, the measured ARFCN will
be displayed, as soon as a measurement is completed on a Hopped TCH. This will
be the lowest frequency ARFCN in the hop sequence.
If Specific is chosen from the Hopped TCH ARFCN Cntl field, enter a specific
ARFCN from the hop sequence. After Meas Arm is selected, the Agilent 8922M/S
will make a measurement when the mobile is transmitting on the selected frequency.
2. Burst Length This field displays the burst length of the Burst Type selected. If Burst Type is set to
User Defined, the Burst Length will be 87 or 147.
3. Burst Number This field selects which burst definition is being displayed.
Range 0 to 3.
14 12
4
18
15
10
97161118
3
5
2
13,17
6
19
21
20