Filter
Top Products
7-8
Messages
Disconnects
Disconnects
Physical Layer
Disconnects
Physical Hardware interface layer error codes are proprietary to the Agilent
8922M/S. The defined error codes are as follows:
”Call disconnected: PH Error: 0x00??”
Causes:
0x0096 - 0x009c Channel or Speech coder failure.
0x009d Channel coder auto recovery to BCCH.
[Non-fatal]
0x009e Channel coder failed, cycle power to
recover. [Fatal]
0x009f Channel coder BCH hang up recovery.
[Non-fatal]
0x00a0 Channel coder failure, BCH hang up.
Cycle power to recover. [Fatal]
0x00a2 Channel coder failure.
0x00a3 Speech coder failure.
0x00a5 Invalid GSM Protocol Processor ROMS.
0x00a6 RTI failed to configure.
0x00a7 Channel or Speech coder failed to
boot.
0x00aa Channel or Speech coder
I/O overloaded.
0x00ab T100 expired.
0x00ac Protocol Message Allocation failed.
Data Link Layer
Disconnects
Data Link layer error codes are proprietary to the Agilent 8922M/S. The defined
error codes are as follows:
”Call disconnected: DL Error: 0x00??”
Causes:
0x00c8 SAPI incorrect.
0x00c9 Timer T200 expired.
0x00ca Re-establish link.
0x00cb Unexpected UA response.
0x00cc Unexpected DM response.
0x00cd Unexpected DM response in multiframe.
0x00ce Unexpected S frame.
0x00cf Frames out of sequence.
0x00d0 Bad parameters in U frame.
0x00d1 Bad parameters in S frame.
0x00d2 Bad M bit in I frame.
0x00d3 I frame length incorrect.
0x00d4 Invalid frame.
0x00d5 Unexpected SABM.
0x00d6 SABM in I frame.
0x00d7 Unexpected release.