Filter
Top Products
4-72
Screens
MS Information / Signaling
7. MS Band
Capability
This field displays the value encoded in the Frequency Capability bits of the mobile
station classmark 2 as defined in ETSI-GSM 04.08.10.5.1.6.
8. MS Revision This field displays the value encoded in the Revision Level bits of the mobile station
classmark 1 and 2 as defined in the ETSI-GSM 04.08.10.5.1.5 and 10.5.1.6
respectively. The field displays a value of Phase 1 or Phase 2.
9. MS IMEI:Request When this field is selected during a call, the Agilent 8922M/S will attempt to obtain
the IMEI (International Mobile Equipment Identity) number of the mobile station. If
a correct IMEI number is obtained, it will be displayed directly below MS
IMEI:Request.
10. MS IMSI This field displays the mobile station’s IMSI (International Mobile Subscriber
Identity) number, obtained from the mobile station during call setup or a location
update.
11. MS Originated
Number
This field displays the called party BCD number the mobile station sent during the
last MS originated call.
This field is updated each time an MS initiated call is accepted.
This field is blank if no called party BCD number was included in the message from
the mobile station.
If an emergency call is made, 112_EMERGENCY_CALL is displayed.
12. Paging IMSI This is the IMSI number the Agilent 8922M/S will use when paging the mobile
station. If you would like to automatically enter an MS (mobile station) obtained
IMSI into this field, make a MS originated call, then select Set Paging IMSI.
Alternatively, set IMSI Attach/Detach to On before the mobile phone camps to the
Agilent 8922M/S.
You can also enter the IMSI number manually.
13. Paging Period This field allows the user to modify the BS-PA-MFRMS field in the Control
Channel Information Element of the System Information Type 3 message. The
purpose of this field is to specify the multiframe period for transmission of Paging
Request Messages.
Range 2 to 9.