Filter
Top Products
3-6
Verifying Performance
Installing and Operating the Software
Forward Conversion
To return the instrument from an Agilent 8922G back to an Agilent 8922M or an
Agilent 8922E to an Agilent 8922S, select the following keys:
• More (this is accessible from the Cell Control screen in the bottom right-hand
corner). Scroll down the list and select CONFIG.
• Compatible, select 8922M or 8922S
• HP-IB Adrs (14)
•
The instrument is returned to an Agilent 8922M or Agilent 8922S.
To Configure the
GPIB Addresses
1 With the program loaded, type EDIT DEFAULT_ADDRESS, press .
2 Modify each line to indicate the proper instrument address (700-730).
It is now possible to re-store the program as “PT_8922” or store it under a
different name.
To Run the Program 1 Type RUN, press .
2 Follow the directions as they appear on the screen.
Notes on Running the Program.
The first screen which appears is the GPIB status of each piece of test equipment
that is supported. It is only necessary to have the instruments responding that will be
used in each particular test. Make certain that each instrument you will be using is
responding at the proper address. Duplicate addresses may make an instrument
appear to be responding but this is not allowed. Press “I” (for Ignore) to continue
past this screen.
The second screen prompts you for the instrument model. If you have disk
08922-10006, select HP 8922G (for Agilent 8922M performance testing) or HP
8922E (for Agilent 8922S performance testing). The third screen which will appear
is the main Performance Tests selection menu. Three options are available on this
screen:
• Select the performance test to run, remember the test instruments and UUT must
be responding over GPIB.
• Turn the printer function ON or OFF. If the printer function is turned on it must
be responding over GPIB or the program will lock up.
• Exit from the program.
Press the key corresponding to the option that you would like to perform. The other
screens that appear are connection instructions, error messages and output results.
PRESET
ENTER
ENTER