Filter
Top Products
8-22
Instrument BASIC
Memory Cards
Initializing an SRAM Memory Card
An SRAM memory card must be initialized before it can be used. Initialize the
SRAM memory card by using the COPY_PL program (which at the same time you
can copy Test Procedure and Test Library files to the memory card). Otherwise,
initialize the SRAM card using the IBASIC computer as follows:
1 Press the front-panel key and then select the Test Function field
(lower-left corner of screen).
2 Choose IBASIC from the Choices menu.
3 Select the IBASIC field, then use the knob to type:
INITIALIZE “:INTERNAL”
Then select Done.
The initialization process takes only a second to complete.
4 Ensure that the SRAM memory card is initialized. Select the IBASIC field, then
use the knob to type:
CAT
Then select Done.
Information for the initialized memory card should appear on the screen.
If the error message “ERROR 85 Medium uninitialized” appears on the
screen, check the SRAM battery to ensure that it’s charged and that its polarity is
correctly oriented in the battery holder.
TESTS