Filter
Top Products
2-39
Making Measurements
Advanced Features
Advanced Features
Other Screens The screens mentioned in this section are not necessary for simple measurement of
mobile phones as the work is done by the functions mentioned previously. However,
the advanced user may find it worthwhile to know what these screens are and what
they are capable of doing.
• RF Generator/RF Analyzer - this screen controls the Agilent 8922M/S RF
generator and RF analyzer. This screen can be accessed by pressing the following
keys:
• , , (RFG/RFA)
• MS Information - the MS INFO (Mobile Subscriber Information) screen gives
you access to the information about the mobile phone itself. A Location Update
can be verified from this screen. This screen can be accessed by pressing:
• , , (MS INFO)
• Cell Configuration - the CELL CONFIG screen gives you access to the control
parameters for the configuration of the cell. This screen can be accessed by
pressing:
•
• Cell Control 2 - gives you the capability to control the additional cell parameters.
This screen is relevant in the set up of a call. This screen can be accessed by
highlighting the More field in any main screen and selecting CELL CNTL2.
• Hopping - the hopping screen allows you manual control of the hopping
frequencies. This feature is only available in the Agilent 8922G compatibility
mode.
• Logging - the logging screen allows control over the Protocol Interface port on
the rear panel (option 003). To access this screen, highlight More and select
LOGGING.
• Configuration - the configuration screen is a full instrument control screen
which allows you to set up the Agilent 8922M/S. Screen set up, compatibility
mode, radio type as well as other miscellaneous pieces of information are
contained on this screen. To access this screen, highlight More and select
CONFIG.
• I/O Configuration - the I/O configuration screen allows you to set up the general
interface of the instrument, such as printer options. This screen can be accessed
by highlighting the More field in any main screen and selecting I/O CONFIG.
SHIFT CELL CNTL
SHIFT CELL CONFIG
CELL CONFIG