Filter
Top Products
100 ICX (International) issued October 2000 ICX-50-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Considerations
•N/A
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
40.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.
Operation
To set the Special Day Modes:
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry. Next message number displays
13. To set additional text Messages, press the volume up or
down key or press the HOLD key to move to the desired
Send Text Message.
Desired Text Message displays
14. Repeat steps 9-13 until all Send Text Messages are
entered.
15. Press the MEMORY key to exit the entry mode. Enter Msg # displays
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 79.)
81-
User MAINT displays
2. At the 81 level, enter 07.
3. Press the HOLD key. 8107-
System Mode displays
4. Enter 1.
Action Result