Filter
Top Products
62 ICX (International) issued October 2000 ICX-50-700
Chapter 3. System Features Section 700 - Operation
Considerations
•N/A
DDI (DID) Day/Night Busy/Delayed Ringing
DDI Day/Night Busy/Delayed Ringing causes an incoming DDI call to a busy primary extension to
ring at a designated extension or extensions. DDI Busy/Delayed Ringing also causes an incoming
DDI call that is unanswered at a primary extension within a certain period of time, to ring at a
designated extension or extensions. Separate ring destinations are available for day and night modes.
DDI Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DDI Busy/Delayed
Ringing destination.
Hardware Requirements
•N/A
Considerations
• Call Forwarding takes priority over DDI Busy/Delayed Ringing
• If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DDI
Busy/Delay Ringing destination. (See “DDI (DID) Day/Night Busy/Delayed Ringing” on page
62.)
Busy Lamp Field Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those
keys.
Hardware Requirements
•N/A
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see “Line Appearances” on page 174.
Busy Lamp Field Delayed Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on
those keys.
Hardware Requirements
•N/A
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see “Line Appearances” on page 174.
Slide Ringing
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk
key.