Filter
Top Products
234 ICX (International) issued June 2000 ICX-50-700
Chapter 6. DSLT Features Section 700 - Operation
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by pressing the
HOLD key.
Operation
To place a call on Broker’s Hold:
Hardware Requirements
•N/A
Considerations
•N/A
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, extension, and network calls may be parked.
There are two ways for an extension to park a call on the ICX. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialling the park answer
code plus the parking extension number. The other way is to park the call at another extension and dial
the park transfer answer code at the other extension to retrieve the call. Beginning in Version 5.0, an
Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-appearing
calls), a Hold Recall, and a Station Park Recall.
To park a call on this extension:
Action Result
1. Pick up the first call.
2. Press the HOLD key. First call on hold
3. Pick up the second call.
4. Press the HOLD key. Second call on hold, first call retrieved
Action Result
1. While on a call, press the HOLD key. • Current call on hold
2. Enter the Call Park Hold access code (default = 771 [UK/
HK] or 771# [Taiwan, Malaysia, Indonesia]).
3. If necessary, page the party that needs to retrieve the call.