Filter
Top Products
204 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To change the Walking TRS (Call Barring)/Station Lockout security code:
Hardware Requirements
•N/A
Considerations
• Walking TRS (Call Barring) and Station Lockout use the same security code.
• You cannot override station lockout using Walking TRS (Call Barring) feature.
• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
• If station lockout is set, the phone is limited to the Station Lockout TRS (Call Barring) Class
outside calling abilities. This TRS (Call Barring) Class should be carefully selected to only allow
the desired call types.
• Without Walking TRS (Call Barring) /Station Lockout Security Code, you cannot set the Station
Lockout feature.
Step Call (Reset Call)
Description
If you dial a busy extension, the system allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
4. Enter the Walking TRS (Call Barring)/Station Lockout
security code.
Cleared St. Lock displays
5. Replace the handset or press the ON/OFF key. The telephone display returns to the nor-
mal display.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Walking TRS (Call Barring)/Station Lockout
Security Code Change code (default = 749 [UK/HK] or
749# [Taiwan, Malaysia, Indonesia]).
Enter Old ID displays
3. Enter the current Walking TRS (Call Barring)/Station Lock-
out security code.
Enter New ID displays
4. Enter the new Walking TRS (Call Barring)/Station Lockout
security code.
Stored ID Code displays
5. Replace the handset or press the ON/OFF key. The telephone display returns to the nor-
mal display.
Action Result