Filter
Top Products
188 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Ringing Line Preference
Description
Ringing Line Preference enables an extension to answer a ringing call by simply picking up the
handset or pressing the ON/OFF key.
Operation
To answer a call using Ringing Line Preference:
Hardware Requirements
•N/A
Considerations
• If disabled in Extension Programming, you must press the line key or enter the feature code for
incoming pick-up in order to answer a call.
Room Monitoring
Version 4.0 and higher
Description
This feature allows the user to monitor the sounds in a room from another extension or room. The
transmitter in the telephone handset is used as a remote “microphone” for monitoring these sounds.
To activate this feature, the monitored extension must enable the Room Monitor feature before the
monitoring extension can listen to the sounds in the room. The monitored extension can be enabled
using a SLT, DSLT, or Key Telephone. No special programming is required to allow an extension to
enable the monitored mode.
Operation
To set up the monitored extension:
Action Result
1. Lift the handset or press the ON/OFF key.
Action Result
1. Dial the monitored extension access code (default 775),
OR...
Note: The handset must be off-hook to activate the
Room Monitor feature.
You will hear a confirmation tone after
the monitored extension has enabled the
Room Monitor feature. (If the monitored
extension has an LCD display, a confir-
mation message will also be shown.)
Press an FF key assigned with the monitored access code