Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
ICX-50-700 ICX (International) issued October 2000 79
About User Programming
User Maintenance requires a Digital Display Key Telephone assigned to a Class of Service (COS) that
allows User Maintenance.
The procedures in the following sections describe the basic steps used for modifying parameters.
However, there are many alternative ways to view and modify the parameters using special keys and
procedures. Some of the more advanced keys include:
REDIAL (At menu level) clears an entry
(At data entry) retrieves the last entry setting
FL/R (At menu level) ignored
(At data entry) clears setting
ON/OFF Begins programming log-in or exits programming
HOLD (At menu level) moves to date and time
(At data entry) saves the displayed setting and moves to the next setting
PROG Moves to the 81 User Maintenance Menu
CONF Moves to the first data setting
MEMORY
Backs out of the address menu levels
MENU Ignored
PREV (At menu level) moves to the previous screen
(At data entry) ignored
NEXT (At menu level) moves to the next screen
(At data entry) ignored
VOLUME (down) Scrolls through the same address level (ascending)
VOLUME (up) Scrolls through the same address level (descending)
FF1 PSD Assignment menu
FF2 SSD Assignment menu
FF3 Extension Name menu
FF4 Verified ID Code menu
FF5 Call Forward ID Code menu
FF6 Message Key ID Code menu
FF7 System Mode menu
FF8 Walking /Station Lock TRS (Call Barring)
FF9 TRF of CWRD
FF10 CID Logging Ext.
Note: Once in a data entry level, you must either enter an acceptable value or restore the previous
value before proceeding. For instance, if you change an entry to an unacceptable value and then press
FF1 to move to the PSD Assignment menu, you will not be able to proceed. You must first enter an
acceptable value.
Operation
To enter User Maintenance mode:
Action Result
1. At a telephone with a COS that allows user login, press the
ON/OFF key.
2. Press the PROG key.
3. Press the * key twice (* *).
4. Press the CONF key. 81-
User MAINT displays