Filter
Top Products
132 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To cancel Call Forwarding - No Answer:
Call Forwarding-All Calls and Do-Not-Disturb
The System allows you to cancel both Call Forwarding-All Calls and Do-Not-Disturb (DND) for your
own extension in one step.
Operation
To cancel Call Forwarding-All Calls and DND:
Hardware Requirements
•N/A
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.
(For example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• If forwarding to an outside number, the destination number must be pre-programmed into a
System Speed Dial (SSD) code.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
• You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call
Forwarding - Busy are set. Cancelling one mode only affects that mode; however, the other
modes will remain set until cancelled individually.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
• You can cancel both Call Forwarding-All Calls and DND by entering 7 * *.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733 (UK/HK) or 733# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 753 (UK/HK) or 753# (Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset or press the ON/OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the CF-All/DND Clear code (default = 7**).
3. Replace the handset or press the ON/OFF key.