Filter
Top Products
90 ICX (International) issued October 2000 ICX-50-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Considerations
•N/A
Set Message Key ID Code
Description
(For a description of the Message Key ID Code Feature, see “Message Key ID Code” on page 74.)
On a large display phone you can use a Message key to either retrieve voice mail messages or respond
to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you
need to set the Message Key ID code to identify the caller to the voice mail system. You can also use
the Message key to program a voice mail password.
Operation
To set the Message Key ID code:
10. Repeat steps 8-9 as many times as necessary to enter the
desired speed dial name.
Note: Press the FL/R key to clear the entire entry.
11. Press the HOLD key to store the entry. Next extension number displays
12. To set additional extension names, press the volume up
and down key or press the HOLD key to move to the
desired SSD.
13. Repeat steps 8-12 until all extension names are entered.
14. Press the MEMORY key to exit the entry mode. Enter EXT # displays
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 79.)
81-
User MAINT displays
2. At the 81 level, enter 06.
3. Press the HOLD key. 8106-
MSG Key ID Code displays
4. Press the HOLD key. MSGID-EXT Number displays
Action Result