Filter
Top Products
Section 700 - Operation Chapter 7. SLT Features
ICX-50-700 ICX (International) issued June 2000 303
When a monitored extension receives a call, the caller hears a busy tone. Additional operations may
be performed from the monitored extension when it is in monitored mode:
It is not possible to monitor an extension from an SLT telephone.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
• FF1-2-02: Dial Plan at DT Pattern 1
• FF1-2-03: Dial Plan at DT Pattern 2
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
• If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
• A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
• A monitoring extension cannot forward a call on hold to a monitored extension.
• A monitored extension cannot receive a transferred call.
Speed Dialling
Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD)
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment
Action Result
1. Placing the handset back on-hook Monitored mode is cancelled. Extension
returns to idle.
2. Pressing digits 0-9, *, # No response is given. Extension remains
in monitored mode.
3. FL/R Monitored mode is cancelled. Dial tone is
returned to handset.