Filter
Top Products
280 ICX (International) issued June 2000 ICX-50-700
Chapter 7. SLT Features Section 700 - Operation
To set Call Forwarding - No Answer:
To cancel Call Forwarding - No Answer:
Call Forwarding and Do-Not-Disturb
The System allows you to cancel both Call Forwarding and Do-Not-Disturb (DND) for your own
extension in one step.
To cancel Call Forwarding and DND:
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 723 (UK/HK) or 723# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 743 (UK/HK) or 743# (Tai-
wan, Malaysia, Indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Dial the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733 (UK/HK) or 733# (Taiwan,
Malaysia, Indonesia].
• For another extension, enter 753 (UK/HK) or 753# (Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone