Filter
Top Products
156 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To transfer a call to the Primary Directory Number extension (NPDNs not called):
To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:
Version 4.0 and higher
Note: FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Hardware Requirements
•N/A
Considerations
• A DN can be assigned as a member of a hunt group.
• DNs are not available for ISDN S-Point, pilot numbers of hunting groups, Voice Mail, ACD, API
and for the Attendant group.
• A PDN must be assigned to a telephone before a corresponding NPDN can be used.
• TRS Class and ARS Routing is determined on an extension port basis regardless of the DN
accessed.
• Busy Override is available to the PDN conversation, but not available to the NPDN conversation.
• Do-Not-Disturb (DND) can only be set through the PDN, but cannot be set through the NPDN.
• Timed Reminder (Alarm Setting) is set through the PDN, but cannot be set through the NPDN.
• Offhook Voice Announce is available to PDN conversation, but not available to the NPDN
conversation.
• The appearance of incoming trunk calls have the following priority if the keys are set to the same
extension:
• Trunk/Floating Hold Key
• MCO Key
• DN Key
• Non-Appearance
Action Result
1. Place the current call on hold. Intercom dial tone
2. Enter the Direct Call to PDN access code (default =766
[UK/HK] or 766# [Taiwan, Malaysia, Indonesia]).
3. Dial the extension number. Dialed number displays
4. If desired, wait until the PDN Extension answers and intro-
duce the call.
5. Hang up.
Action Result
1. Press an NPDN (or PNPDN) key. Intercom dial tone
2. Dial the access code for Call Forwarding (Direct = 721),
(Busy = 722), (No Answer = 723).
3. Dial the Call Forward Destination extension number. Dialed number displays