Filter
Top Products
278 ICX (International) issued June 2000 ICX-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To set Call Forwarding - All Calls:
To cancel Call Forwarding - All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 721 (UK/HK) or 721# (Taiwan,
Malaysia, indonesia).
• For another extension, enter 731 (UK/HK) or 731# (Tai-
wan, Malaysia, Indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 731 (UK/HK) or 731# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 751 (UK/HK) or 751# (Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, enter
the extension number.
4. Replace the handset.