Filter
Top Products
Section 700 - Operation Chapter 7. SLT Features
ICX-50-700 ICX (International) issued June 2000 281
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward/All Calls)
• FF1-0-03: Extension COS (Call Forward/Busy)
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
• FF1-2: Dial Plan
• FF3-0: Extension COS Assignment
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.
For example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
• You can cancel both Call Forwarding and DND by entering 7 * *.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
Call Hold
Description
The system provides the following types of Call Hold:
• System Hold
• Floating Hold (Retrieve Only)
• Exclusive Hold
• Broker’s Hold
• Call Park (Station)
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
2. Enter the CF/DND All Clear code (default = 7**).
3. Replace the handset.
Action Result