Filter
Top Products
310 ICX (International) issued June 2000 ICX-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.
Trunk Access
Description
The System supports the following ways to seize an idle trunk to make an outside call:
• Direct Trunk Access
• MCO Trunk Access
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time you want the Timed Reminder Call to sound.
(Enter the time in 24-hour format. For example, 0100 for 1
AM, 1300 for 1 PM).
4. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset.