Filter
Top Products
Section 700 - Operation Chapter 3. System Features
ICX-50-700 ICX (International) issued October 2000 61
• DDI Day/Night Busy/Delayed Ringing
• Busy Lamp Field Immediate Ringing
• Busy Lamp Field Delayed Ringing
• Slide Ringing
• Alarm Ringing
Day 1/ Day 2/Night Ringing
When the System is in Day 1 mode, calls can be directed to ring at one or more extensions or at a hunt
group per the Day 1 ringing assignments.
When the System is in Day 2 mode, calls can be directed to ring at one or more extensions or at a hunt
group per the Day 2 ringing assignments.
When the system is in Night mode, call can be directed to ring at one or more extensions or at a hunt
group per the Night ringing assignments.
Inbound calls can be directed to desired normal daytime locations by setting the system into a Day
mode. By having a second day mode (Day 2) alternative call handling is available during day
operation. For instance, during lunch, calls can be directed to an alternative position.
Calls can be directed specific night locations when the system is set to Night mode.
For more information on Day Ringing, see “Day/Night System Mode” on page 36.
Hardware Requirements
•N/A
Considerations
•N/A
Day 1/ Day 2/Night Delayed Ringing
Delayed Ringing causes an incoming outside call that is unanswered at a primary extension within a
certain period of time, to ring at a designated extension or extensions. Delayed ringing destinations
can be set for Day 1, Day 2 and Night modes. trunk Delayed Ringing is also available for hunt group
pilot numbers.
Hardware Requirements
•N/A
Considerations
•N/A
DDI (DID) Day/Night Ringing
(Note: Analog DID is not available in the UK, TX or EX model).
Incoming DDI calls can be set to ring at day destinations when the system is in day mode and ring at
night destinations when the system is in night mode.
Hardware Requirements
• DDI (DID) Trunk Card