Filter
Top Products
222 ICX (International) issued June 2000 ICX-50-700
Chapter 6. DSLT Features Section 700 - Operation
Code users can “float” from phone to phone, placing calls that would normally be restricted on that
phone.
Non-Verified Account Codes
Non-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account code
before making a call.)
You can assign Non-Verified Account codes to both incoming and outgoing calls. To assign an
account code to an outgoing call, you enter the account code before making the call or during the call.
To assign an account code to an incoming call, you enter the account code during the call.
Operation
To enter an account code before making a call:
To enter an account code during an outside call:
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) - Call Barring can
be allowed to make outgoing calls by entering a Verified Account code that changes the TRS (Call
Barring). After a call is made, the Call Logging record for the call will show the verified account
code.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Account Code feature code (default = 8#).
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
5. Press a vacant trunk key or enter a trunk access code
(default = 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or
81-84).
6. Dial the phone number.
Action Result
1. During a call, press the MEMORY key.
2. Press the # key.
3. Enter the Account Code (up to 10 digits).
4. Press the # key.