Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
ICX-50-700 ICX (International) issued October 2000 135
Hardware Requirements
•N/A
Considerations
• The number of floating hold orbits available may very depending on the Station/Floating Park
Hold Pickup setting (FF1-0-02-0025). The call pickup access code can set to *9 (default). The
“*9” access code operates as follows:
Exclusive Hold
With Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be used
to hold trunk calls and extension calls.
Operation
To place a call on Exclusive Hold:
To retrieve a call from Exclusive Hold:
Hardware Requirements
•N/A
Considerations
• Intercom calls will be held as Exclusive when placed on hold by pressing the HOLD key.
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by pressing the
HOLD key.
System Size Virtual Line Number and Operation
96
01-09: Floating Hold pick up
10-96: For Station Park Hold pick up purpose
Above 96
001-099: Floating Hold pick up
100-576: For Station Park Hold pick up purpose
Action Result
1. While on a call, press the trunk key used for the call or press
the HOLD key.
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
Action Result
1. Press the trunk key on which the call is held. • Trunk LED stops flashing, remains
green
• CO XXX displays if call released
(where XXX = outside line number)