Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
ICX-50-700 ICX (International) issued October 2000 81
Hardware Requirements
•N/A
Considerations
•N/A
Set Call Forward Busy Destination Extension
Description
You can assign a Call Forward Busy Destination Extension for each extension. This is typically used
for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
11. To set additional Absence Messages, press the volume up
or down key or press the HOLD key to move to the desired
Absence Message.
Desired Absence Message displays
12. Repeat steps 7-11 until all Absence Messages are entered.
13. Press the MEMORY key to exit the entry mode. Enter Msg # displays
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 79.)
81-
User MAINT displays
2. At the 81 level, enter 09.
3. Press the HOLD key. 8109-
TRF of CFWD displays
4. Enter 0.
5. Press the HOLD key. CFWD-Busy EXT # displays
6. Dial the extension number.
7. Press the HOLD key. Enter CODE displays
8. Enter the destination extension.
9. Press the HOLD key to store the entry. Next extension number displays
Action Result