Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
ICX-50-700 ICX (International) issued October 2000 101
5. Press the HOLD key. 1-
Mode Special Day displays
6. Press the HOLD key. 1000 :MMDD
Special Day 01 displays
7. Enter the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note: To clear an entry or existing data, press the
FL/R
key.
8. Press the HOLD key. 1001 :HHMM
S Day 01-1 Start displays
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note: To clear an entry or existing data, press the FL/R
key.
10. Press the HOLD key. 1002 :
S Day 01-1 Mode displays
11. Enter the desired mode for Special Day ( (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).
Note: To clear an entry or existing data, press the
FL/R
key.
12. Press the HOLD key. Next Special Day mode displays
13. To set additional Special Day modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
14. Repeat steps 7-13 until all Special Day modes are set. (Up
to 20 special days may be entered.)
Note: The entry positions are listed in Table 13.
15. Press the MEMORY key to exit the entry mode. 1-
Mode Special Day displays
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result