Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
ICX-50-700 ICX (International) issued October 2000 109
Hardware Requirements
•N/A
Considerations
•N/A
Set System Speed Dial Names
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 194 for a Digital
Key Telephone, “System Speed Dial” on page 257 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 305 for a Single Line Telephone (SLT).
Operation
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 95.
• See Example 2. Small-Display Phone on page 96.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry. Next SSD index number displays
13. To set additional SSD index names, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
Desired SSD index number displays
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the MEMORY key to exit the entry mode. Enter SSD # displays
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result