Filter
Top Products
Section 700 - Operation Chapter 6. DSLT Features
ICX-50-700 ICX (International) issued June 2000 257
* Indicates that the digits that follow are either a feature access code or an extension
number. (Not needed if your System is set for Intercom Level.) See Note below.
** Indicates that the digits that follow are for an outside number and the System should
seize the next available trunk when dialling. (Not needed if your System is set for Trunk
Level.) See Note below.
Note: The System has two levels - Trunk Level and Intercom Level. If set at Trunk Level
(default), you must enter the code for Intercom Level when programming a feature access code
or extension number for speed dialling. If the System is set at Intercom Level, you must enter the
MCO Code when programming an outside number for speed dialling.
System Speed Dial
You can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can be
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
Operation
To assign SSD numbers:
To dial an SSD number by entering the speed dial bin number:
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (00-79 or 000-799).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the MEMORY key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the SSD bin number (00-79 or 000-799).
5. Complete call and replace the handset or press the ON/OFF
key.