Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
ICX-50-700 ICX (International) issued October 2000 129
Call Forwarding
Description
Call Forwarding allows you to send your calls to another extension, to an outside line, or to Voice
Mail. Call Forwarding can be set or cancelled under the following conditions from either your own
extension or from an alternate extension:
• Call Forwarding - All Calls
• Call Forwarding - Busy
• Call Forwarding - No Answer
Call Forwarding-All Calls
When Call Forwarding - All Calls is set, all incoming calls to an extension are immediately
forwarded. Beginning with Version 5.0, a Flexible Function key can be programmed so that the LED
indicates when this feature is active. The LED will light red when Call Forwarding-All Calls is set.
To set Call Forwarding-All Calls:
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 721 (UK/HK) or 721# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 741 (UK/HK) or 741# (Tai-
wan, Malaysia, Indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For informa-
tion, see “Speed Dialling” on page 192.)
5. Replace the handset or press the ON/OFF key.