Filter
Top Products
Section 700 - Operation Chapter 7. SLT Features
ICX-50-700 ICX (International) issued June 2000 279
To set Call Forwarding - Busy:
To cancel Call Forwarding - Busy:
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call forward No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 722 (UK/HK) or 722# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 742 (UK/HK) or 742# (Tai-
wan, Malaysia, indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 732 (UK/HK) or 732# (Taiwan,
Malaysia, Indonesia).
• For another extension, enter 752 (UK/HK) or 752# (Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.