Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
ICX-50-700 ICX (International) issued October 2000 137
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transferred call park:
Hardware Requirements
•N/A
Considerations
• You cannot park more than one call at a time.
• Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 163).
• No more than one Call Park Answer key may be assigned to a single telephone.
• A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
Enter the Call Park Answer/Other Ext. access code (default
= 773 [UK/HK] or 733# [Taiwan, Malaysia, Indonesia]).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default = *9). (Version 3.0 and higher)
Enter Park EXT # displays
2. Dial the number of the extension that parked the call. • CO TALK TRK #XX displays (where
XX = line number)
• Connected to parked call
Action Result
1. Press the HOLD key. • Current call on hold
• CO HOLD #XX displays (where XX =
trunk number)
2. Enter the Call Park Transfer access code (default = 774
[UK/HK] or 774# [Taiwan, Malaysia, Indonesia]).
Enter TRNS EXT # displays
3. Dial the extension number to receive the parked call,
OR
Press the BLF key
Park (ext#) displays on lower display
4. If necessary, page the party that needs to retrieve the call.
Action Result
1. At the extension with the transferred park call, lift the hand-
set or press the ON/OFF key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default = 772
[UK/HK] or 772# [Taiwan, Malaysia, Indonesia]).
• CO TALK TRK #XX displays (where
XX = line number)
• Connected to parked call