Filter
Top Products
Section 700 - Operation Chapter 4. User Maintenance
ICX-50-700 ICX (International) issued October 2000 85
Operation
To set a Caller ID Logging Extensions using either a large-display or small-display
phone:
Hardware Requirements
•N/A
Considerations
•N/A
Set Day of Week Mode
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
40.)
The System allows you to specify up to 3 mode patterns. This menu item determines which pattern to
follow for a given week day in the month (i.e., first Monday, second Monday, etc.).
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 79.)
81-
User MAINT displays
2. At the 81 level, enter 10.
3. Press the HOLD key. 8110-
CID Logging EXT displays
4. Press the HOLD key. CID Logging # displays
5. Enter log control number.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key to store the entry. Next log control # displays
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the
MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off