Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
ICX-50-700 ICX (International) issued October 2000 169
Handsfree Answerback
Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press 1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
Hardware Requirements
•N/A
PDN #1 Key 01
PDN #2 Key 02
PDN #3 Key 03
NPDN #1 Key 01 + (Ext No. 0-9999)
NPDN #2 Key 02 + (Ext. No. 0-9999)
NPDN #3 Key 03 + (Ext. No. 0-9999)
ACD-1 Wrap Key Γ#83 (Version 3.5 and higher)
ACD-2 Wrap Key Γ#88 (Version 3.5 and higher)
Text Message Sent Γ75 + (Message code no. 0-9)
Text Message Reply Γ76 + (Message code no. 0-9)
Login Key for CTAPI Γ#90 (Version 3.5 and higher)
Note: The following feature keys were added with Version 4.0
Message and Voice Mail Key 76 + (Ext. No. 0-9999)
Silent Monitor Key 77 + (Ext. No. 0-9999) 768
Call Record Key 78 + (Ext. No. 0-9999)
Room Monitoring Set Key Γ#05 775
Room Monitoring Initiate Key Γ#06 776
Action Result
1. When the intercom call arrives, confirm that the MIC LED
is off.
(If it is lit, press the MIC key to turn it off.)
2. Speak into the microphone to answer.
Feature Description
REDIAL + Fixed Feature
Code + (additional digits to
program into key)
Default Flexible Feature Code
(if not listed, must use Fixed Feature
Code)