Filter
Top Products
Section 700 - Operation Chapter 6. DSLT Features
ICX-50-700 ICX (International) issued June 2000 223
Operation
To make an outside call that requires an account code:
Hardware Requirements
• An Call Logging printer or external call accounting system is required to collect account code
records.
Considerations
• Account codes are not available during conversation recording mode for the Built-In Voice Mail.
• Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
• Account codes will be cancelled after using trunk queuing.
• Account Codes interact with TRS (Call Barring) as shown in the following table:
Attendant Group Calls
Description
You can call the attendant group from any extension by dialling the designated attendant number.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (10 digits).
4. Press a vacant CO Trunk key or enter a trunk access code
(default = 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or
81-84).
5. Dial the phone number.
Forced or Not Forced
Verified or
Non-Verified
TRS (Call Barring) Class
No Account Entry Account Entry
Not Forced Non-Verified Extension Port Based TRS
Class
Extension Port Based TRS
Class
Verified Account Code Based TRS
Class
Forced Non-Verified TRS Class for Forced
Account Code
(FF1 0 19 0001)
Extension Port Based TRS
Class
Verified Account Code Based TRS
Class