Filter
Top Products
Section 700 - Operation Chapter 3. System Features
ICX-50-700 ICX (International) issued October 2000 57
Network Centralized Voice Mail
Version 3.5 and later
Network Centralized Voice Mail allows one primary attendant group in the network to handle network
attendant calls.
Related Programming
• FF6-2-04: Route Table: Digit Modify Pattern No.
• FF6-2-05: Digit Modify Table - Add Ending Digits
• FF6-2-05-0005: Numbering Plan
• FF6-2-06: Authorization Code (UK Only)
• FF6-2-09-0001: Dialing Access Voice Mail System
• FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)
• FF8-1-05: Call-Forward ID Codes for Voice Mail
• FF8-1-06: MSG Key ID Codes (USA only)
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.
Network Flash Transfer
Version 3.5 and later
When three or more systems are networked together with one ICX as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Related Programming
• FF1-0-04: Trunk COS (Network Flash Forwarding)
Network Hold
Version 3.5 and later
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
Related Programming
• FF1-0-04: Trunk COS (Broker’s Hold for Network Calls)
• FF1-1-01-0020: Network Flash Signal Timer
• FF1-2-02: FF Dial Codes: Plan A (Network Flash Send During Intercom Dial Tone)
• FF1-2-03: FF Dial Codes: Plan B (Network Flash Send During Intercom Dial Tone)
• FF4-0-BSSC-0: FF-Key Assignment (Network Flash During Talk on FF-key)
Network Paging
Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.