Filter
Top Products
98 ICX (International) issued October 2000 ICX-50-700
Chapter 4. User Maintenance Section 700 - Operation
Set Personal Speed Dial Numbers
Description
For a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 192 for a Digital
Key Telephone, “Personal Speed Dial” on page 255 for a Digital Single Line Telephone (DSLT), and
“Personal Speed Dial” on page 304 for a Single Line Telephone (SLT).
Operation
To set PSD numbers:
Hardware Requirements
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 79.)
81-
User MAINT displays
2. At the 81 level, enter 01.
3. Press the HOLD key. 8101-
PSD Assignment displays
4. Press the HOLD key. 0 :
PSD Number displays
5. Press the HOLD key. EXT Number displays
6. Dial the extension number.
7. Press the HOLD key. Enter PSD # XXX displays (where
XXX = dialled extension number)
8. Enter the PSD bin number (80-99).
9. Press the HOLD key. YYY ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
10. Enter the PSD digits to be dialled.
Note: To clear an entry or existing data, press the FL/R
key.
11. Press the HOLD key to store the entry. Next PSD bin number displays
12. To set additional PSD numbers, press the volume up and
down key or press the HOLD key to move to the desired
PSD bin number.
Desired PSD bin number displays
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off