Filter
Top Products
282 ICX (International) issued June 2000 ICX-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold:
To retrieve a held call on a specific trunk:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Hookflash Operation for SLT)
• FF3-0: Extension COS
Considerations
•N/A
Floating Hold (Retrieve Only)
Floating Hold allows calls to be placed in a hold orbit (position) for retrieval elsewhere in the system.
Floating Hold is most commonly used by the attendant group when they are unable to locate the
desired party. If the desired party does not answer his/her phone, the attendant places the caller on
Floating Hold and asks over the paging system that the desired party dial *9XXX to retrieve the held
call.
Note: Single Line Telephone (SLT) positions are not able to place a call on Floating Hold. However,
an SLT can retrieve a call on floating.
Action Result
1. While on a call, hookflash. Intercom dial tone
Action Result
1. If onhook, go offhook. Intercom dial tone
2. Hookflash. Retrieve call
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.