Filter
Top Products
Section 700 - Operation Chapter 6. DSLT Features
ICX-50-700 ICX (International) issued June 2000 263
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.
Trunk Access
Description
The System supports the following ways to seize an idle trunk to make an outside call:
• Direct Trunk Access
• MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
Hardware Requirements
•N/A
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset or press the ON/OFF key.
Action Result
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number. Outside dial tone
4. Dial the phone number.