Filter
Top Products
Section 700 - Operation Chapter 5. Key Telephone Features
ICX-50-700 ICX (International) issued October 2000 211
• While talking in intercom mode, during trunk seizure, or during trunk talk - up to 5 functions
Each extension may have customized soft key features available. The customization must be
programmed by the dealer.
To access the feature beside the soft key, simply press the associated soft key.
Operation
To enable Variable Mode:
To Execute a Variable Mode Function:
To cancel Variable Mode:
To assign Variable Mode Functions to a Small Display Telephone
Action Result
1. Press the ON/OFF key.
2. Press the Variable Mode FF key AUTO FNC Mode displays
3. Press the ON/OFF key. Programmed features display
Action Result
1. Press the NEXT or PREV keys on the large display tele-
phone or the up or down arrow keys on the small display
telephones until the desired function appears
2. Press the soft key next to the desired function The variable mode function executes
Action Result
1. Press the ON/OFF key.
2. Press the Variable Mode FF key. AUTO FNC Mode displays
3. Press the ON/OFF key again.
Action Result
1. Press the ON/OFF key.
2. Press PROG + 95 + (XX) + Fixed Feature Code (see
Table 18 on page 165).
OR...
Press PROG + 95 + (XX) + FL/R + Flexible Feature
Code (see Table 18 on page 165).
(where XX is the Flexible Screen position as listed below).
The variable mode function executes
3. Press the ON/OFF key