Filter
Top Products
300 ICX (International) issued June 2000 ICX-50-700
Chapter 7. SLT Features Section 700 - Operation
OR
NOTE: The steps outlined above can be performed only when the necessary settings have been
programmed into the system.
Hardware Requirements
•N/A
Related Programming
• FF3: Trunk Off-Hook Signal
• FF1-1: Off-Hook Signal Timer
Considerations
• The trunk call type may be either multiple ring, or DDI/DIL whose destination is set to Auto
camp-on (Call Waiting).
• Offhook signalling is not supported for an ISDN terminal.
• The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy Override
• Data Privacy is enabled
• Receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement.
Operation
To make an OHVA :
Action Result
1. Press and release the hook quickly (hookflash). First call is placed on hold; incoming call
connects.
2. Press and release the hook quickly to go back to the
original call.
First call connects again.
Action Result
1. Lift the handset.
2. Dial the extension number. Busy signal
3. Enter the OHVA feature access code (default = 8 [UK/HK]
or 8# [Taiwan, Malaysia, Indonesia]).
4. Make your announcement