Filter
Top Products
64 ICX (International) issued October 2000 ICX-50-700
Chapter 3. System Features Section 700 - Operation
For example, an outgoing call is an LRS Outgoing call (L) but it is also a transferred call. The Call
Logging data condition code will be T to indicate that the call was an Outgoing Transfer. (A
transferred call’s condition code takes precedence over the type of call - LRS Outgoing call [L].)
Table 9. Priority of incoming call condition codes
For example, an incoming call is a DDI Incoming call (D), but it is also a transferred call. The Call
Logging data condition code will be t to indicate that the call was an Incoming Transfer call. (A
transferred call’s condition code takes precedence over the type of call - DDI Incoming call [D].)
Figure 1. Output data formatt
Condition Code: (I: Incoming call / D: DDI incoming call / h: Hold incoming call / N: Network
incoming call / S:DISA incoming call / t: Transfer incoming call / A: Abandoned Call / O: Outgoing
call [Non LCR] / F: Call forward outside call / H: Hold outgoing call / L: LCR outgoing call / T:
Transfer outgoing call / W: Closed Numbering)
Call Start Time (MM=01 to 12 / DD=01 to 31 / HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
Call Duration Time (HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
Trunk User No. (Extension line No.: 0 to 9999 / trunk No.: C001 to C576)
Trunk No. (Trunk No.: 001 to 576 / When trunk is disconnected while the call is on hold: *001 to
*576)
Priority
Condition
Code
Description
Highest
h or t h = Incoming Hold
t = Incoming Transfer
2nd
D, N, or S D = DDI Incoming Call
N = Network Incoming Call
S = DISA Incoming Call
Lowest
I or A I = Incoming Call
A = Abandoned Call
Format #1
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvvvH
Format #2
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv
dddddddddddddddd cccccccc MM:SSH
1 2 3 4 5 6 7 8
8
2 3 4 5 6
9
7
10
1
11
1
2
3
4
5