Filter
Top Products
252 ICX (International) issued June 2000 ICX-50-700
Chapter 6. DSLT Features Section 700 - Operation
The System allows you to make both internal and external pages and announcements. Internal pages
are made via the System’s key telephone speakers. External pages are made through the speakers of
an external paging system connected to the System.
Paging calls can be answered from any extension using the Meet-Me Answer feature.
Operation
To make a page:
Meet-Me Answer
To answer a page using Meet-Me Answer:
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Considerations
• If an external paging system has been connected, pages can be made to paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
• An extension can belong to more than one paging group.
• Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal.
• Beginning with Version 4.5 and higher, the paging system can be set to “timeout” if a page
remains unanswered for a specified length of time (0 to 255 seconds). If this feature is set and the
timeout period has elapsed, the page originator’s handset will emit a Fast Busy Tone.
Room Monitoring
Description
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Group Paging code (default = #).
3. Enter the number of the desired paging group (0-9).
4. Make your announcement.
5. Replace the handset or press the ON/OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Meet Me Answer code (default = ##). Connected to specified party