Filter
Top Products
54 ICX (International) issued October 2000 ICX-50-700
Chapter 3. System Features Section 700 - Operation
Hardware Requirements
•N/A
Considerations
• Extension names can be up to 10 characters in length.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4 “User
Maintenance” of this document.)
Speed Dial Name Assignments
You can assign names to PSD numbers from a display telephone without entering the programming
mode. If allowed in the Extension COS, you can also assign names to SSD numbers.
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
Action Result
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the PSD Name Assignment mode. A B C D E F P80 displays (where P80 =
PSD bin 80)
5. Press the up or down arrow key to display the desired PSD
bin number.
A B C D E F PXX displays (where PXX
= desired PSD bin number)
6. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
51.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 52.)
Note: Press the FL/R key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 51.
• See “Example 2. Small-display phone” on page 52.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note: Press the FL/R key to clear the entire entry.
9. Press the HOLD key when finished. Next PSD bin number displays
10. To enter another speed dial name repeat steps 5-9.