Filter
Top Products
152 ICX (International) issued October 2000 ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To establish a conference call:
To establish a two-party private conversation from a 3-party conference:
Action Result
1. While on a call, press the HOLD key or the line key of your
current call.
Extension number, outside line number,
or name of held party displays
2. If adding an outside party, press a vacant trunk key, or dial a
trunk access code (default = 9 [UK/HK], 0[Taiwan, Malay-
sia, Indonesia], or 81-84).
• Outside dial tone
• CO #XXX displays (where XXX = line
number)
3. Dial the number of the party you wish to add to the call. Dialed number displays
4. Press the CONF key when your call is answered. CNF1:CO XXX or EXT XXX and
CNF2:CO YYY or EXT YYY displays
(where XXX = first party and YYY = sec-
ond party)
5. To add additional parties, repeat steps 1-4
6. For 3-party Conference Call Only:
To release a conference member, press PROG + 1 to
release conference member 1 or press PROG + 2 to release
conference member 2, etc.
Note: The conference member numbers are shown on the
display.
(Available up to 3-party conference. Not
available for 4-party or more conferenc-
ing)
7. To drop out of the conference call, hang up. (See ** Consideration below)
Action Result
1. While on a call, press the CONF + 1 (2) to have a private
conversation with the CNF 1 (2) party as shown on the dis-
play.
You and the selected party are in a sepa-
rate conversation from the other confer-
ence parties.
2. To reestablish the conference, press CONF. CNF1:CO XXX or EXT XXX and
CNF2:CO YYY or EXT YYY displays
(where XXX = first party and YYY = sec-
ond party)