Filter
Top Products
Section 700 - Operation Chapter 3. System Features
ICX-50-700 ICX (International) issued October 2000 39
To switch Day 1/Day 2/Night modes using Feature Access Codes (Version 3.0 and
later):
Hardware Requirements
•N/A
Considerations
• Day and Night modes can be assigned to FF keys on a phone. You can switch between Day 1,
Day 2, Night, Night 1, and Night 2 modes simply by pressing the appropriate key. The FF key
lights red when the System is in the assigned mode. Alternatively a Day/Night toggle mode key
can be assigned. Pressing the key toggles between modes. When in Day mode, the FF key LED
is not lit. When in Night mode, the LED lights red.
Switch Mode Procedure Indication
Toggle Day 1,
Day 2 and Night
Modes
1. Press the ON/OFF key. Intercom dial tone
ON/OFF LED lights
2. Enter 760 (UK/HK) or 760# (Tai-
wan, Malaysia, Indonesia).
3. Press the ON/OFF key ON/OFF LED goes off
If changing to Day 2 mode, Green LED lights
If changing to Night mode, Red LED lights
If changing to Day 1mode, LED goes off
Day 2 Mode
1. Press the ON/OFF key. Intercom dial tone
ON/OFF LED lights
2. Enter 761 (UK/HK) or 761# (Tai-
wan, Malaysia, Indonesia) for the
Day 2 Feature code.
3. Press the ON/OFF key ON/OFF LED goes off
Green LED lights
Night 1 Mode
1. Press the ON/OFF key. Intercom dial tone
ON/OFF LED lights
2. Enter 762 (UK/HK) or 762# (Tai-
wan, Malaysia, Indonesia) for the
Night 1 Feature code.
3. Press the ON/OFF key ON/OFF LED goes off
Red Night LED lights
Night 2 Mode
1. Press the ON/OFF key. Intercom dial tone
ON/OFF LED lights
2. Enter 763 (UK/HK) or 763# (Tai-
wan, Malaysia, Indonesia) for the
Night 2 Feature code.
3. Press the ON/OFF key ON/OFF LED goes off
Red Night LED lights